Fittings and special parts
A full range of standard fittings for complete, reliable installations: elbows, flanges, tees, reducers, caps and fabricated parts, DN 50–2600, PN 4–32.
Pick a part
Our pipe systems are complemented by a full range of standard fittings for complete, reliable installations.
Elbows
Custom segmented elbows: 1° to 30° with one segment (type 1C), 31° to 60° with two segments (type 2C), 61° to 90° with three segments (type 3C).
Flanges
Flanges made from DN 50 to DN 2600, nominal pressure ratings from 4 to 32 bar, and other classes per project or client requirement. Drilling to the requested standard and installation requirements.
Equal, reducing and lateral tees
Tees for network branches: equal, reducing (DN1 / DN2) or lateral, with length L to suit the project.
Eccentric reducers
Diameter change with an aligned generatrix, to keep a continuous invert or avoid air pockets.
End caps
Dished ends to safely close pipeline ends (diameter ND, height H).
Fabricated fittings
Special parts to drawing: branches, spools, connection pieces to structures and existing networks.
Fabricated parts to your drawings
Branches, spools, connection pieces to structures: send your drawing with your quote request and our engineering team studies the fabrication.
- Flanges DN 50 to 2600, PN 4 to 32 bar
- Drilling to the requested standard
- Same pressure classes as the pipes